BRFRR - P7002 PLASTISOL, VINYL
- MSDS: BRFRR
- Manufacturer: QCM COMPANY
- Product Name: P7002 PLASTISOL, VINYL
- National Stock Number: 8030-01-041-1604
Product Identification
Product ID:P7002 PLASTISOL, VINYL
MSDS Date:01/01/1988
FSC:8030
NIIN:01-041-1604
Kit Part:Y
MSDS Number: BRFRR
Responsible Party
KENT, WA 98032
US
Emergency Phone: 206-859-0933/800-424-9300 CHEMTREC
Info Phone: 206-859-0933
Preparer: ROY WHEELDON
Cage: 8L872
Contractor
Telephone: 201-437-6501
Cage: 33150
Ingredients
VINYL CHLORIDE MONOMER (SARA III)
CAS: 75-01-4
RTECS: KU9625000
Fraction By Weight: <0.003%
OSHA PEL SEE 1910.1017
ACGIH TLV: 5 PPM, A1; 9293
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
PHTHALATE PLASTICIZER
EPOXIDIZED SOYBEAN OIL
PVC RESIN
STABILIZER
ORGANIC PIGMENT
Hazards
Health Hazards Acute and Chronic:EYE CONTACT: MAY CAUSE IRRITATION.
SKIN CONTACT: CAN CAUSE SLIGHT IRRITATION. INHALATION: SMOKE SHOULD
BE VENTILATED IF HEAT PROCESSED. INGESTION: CAN CAUSE
GASTROINTESTINAL IRRITATION, NAUSEA, VOMITI NG, AND DIARRHEA.
First Aid
First Aid:EYE CONTACT: FLUSH WITH WATER FOR 15 MINUTES. SKIN CONTACT:
WASH WITH SOAP AND WATER. INHALATION: IF EXCESSIVE INHALATION,
REMOVE TO FRESH AIR. INGESTION: CONSULT A PHYSICIAN.
Fire Fighting
Flash Point:>350F,>177C
Extinguishing Media:DRY CHEMICAL, REGULAR FOAM OR WATER FOG
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS IF
IGNITED.
Unusual Fire/Explosion Hazard:TOXIC GASES CAN FORM CARBON DIOXIDE,
CARBON MONOXIDE, VARIOUS HYDROCARBONS.
Accidental Release
Spill Release Procedures:SMALL SPILLS: ABSORB ON VERMICULITE OR FLOOR
DRY. LARGE SPILLS: PUMP TO SALVAGE TANK.
Handling
Handling and Storage Precautions:CONTAINERS MAY BE HAZARDOUS WHEN
EMPTIED DUE TO VAPOR BUILD-UP. STORE BETWEEN 50F AND 90F, AWAY FROM
HEAT OR FLAME.
Other Precautions:ALL HAZARD PRECAUTIONS IN THE DATA SHEET MUST BE
OBSERVED.
Exposure Controls
Respiratory Protection:RECOMMENDED IF LOCAL EXHAUST. NIOSH APPROVED
Ventilation:LOCAL EXHAUST RECOMMENDED FOR HEAT PROCESSING. MECHANICAL
(GENERAL) RECOMMENDED.
Protective Gloves:POLYETHYLENE TYPE
Eye Protection:SAFETY GLASSES
Other Protective Equipment:WASH WITH SOAP AND WATER IF CONTACT WITH
SKIN. WASH CONTAMINATED CLOTHING BEFORE REUSE.
Work Hygienic Practices:GOOD INDUSTRIAL HYGIENE.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:1.1 (WATER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VARIOUS COLORED LIQUID, VISCOUS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
VARIOUS HYDROCARBONS, HYDROGEN CHLORIDE
Disposal
Waste Disposal Methods:INCINERATE ACCORDING TO LOCAL AND FEDERAL
STANDARDS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.